Vulcan Pumps are built for the most challenging dewatering applications. Constructed from highly abrasion resistant materials including High-Chrome Cast Iron, and Duplex Stainless Steel, these pumps go into services that simply destroy most types of pumps. Vulcan Pumps are entirely a Made-In-The USA product.
Vulcan Pumps are used for applications such as:
Kaolin Clay
Coal Tunnel Sumps
Sand and Gravel Weir Overflow
Coal Pile Runoff
FGD Blowdown Sumps
Dredging
Slag Pits
Tar Sands
Drilling Mud Reclamation
With all of their experience in these applications, Vulcan can also design and build a complete floating barge for your submersible pump or vertical turbine application, including for other pump brands.
Quick Links: Vane Pumps | Tubing Pumps | Solenoid Pumps
Quick Links:
Vane Pumps
Tubing Pumps
Solenoid Pumps
HDS Series – High Chrome Cast Iron Pumps
Models: 10 models standard, 5 Low Head, 4 Medium Head, 1 High Head
Flow Rate: 3,500 GPM max
Max Head: 310 Feet (170 Feet on Medium Models)
Construction: ASTM A532 Cast Iron High-Chrome housing, 416SS Shaft, 17-4 Stainless Impeller, Slurry Mechanical Seal.
Motor: 7.5 – 200 HP, 3 phase, TENV, 460V, or 575V standard. XP optional
HDSS Series – Stainless Steel Pumps
Models: 10 models standard, 5 Low Head, 4 Medium Head, 1 High Head
Flow Rate: 3,500 GPM max
Max Head: 310 Feet (170 Feet on Medium Models)
Construction: CD4MCUN Duplex Stainless Steel housing, impeller and agitator, 316SS motor housing and stand, Slurry Mechanical Seal. Also available in Alloy 20, 2205 and 2207 materials
Motor: 7.5 – 200 HP, 3 phase, TENV, 460V, or 575V standard. XP optional
Floating – Barge Systems
Designs: All barges designed and approved by structural engineers. Balance based on maximum worst case thrust conditions of pumps to provide list-free operation, extending life of pump bearings.
Options: Simplex, Duplex, Triplex Vertical Turbine, Submersible or Horizontal Self-Priming Centrifugal versions
Walkways, railings, gangways to shore, roof covers over pumps and electronics
Construction: A36 Steel barge and float frames, HDPE molded floats filled with EPS foam to resist filling with water if punctured
Motor: AC, 1ph & 3ph, 50/60 Hz, and Brushless DC available to 3450 RPM